Éditeur(s) : Virgin Islands Energy Office Virgin Islands Energy Office
North America -- United States Virgin Islands
Caribbean

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During the early years of the Iceland Deep Drilling Project (IDDP), development of three distinctive technological and scientific approaches were formalised and then carried out until 2010 within a European funded project called HiTI (high temperature instruments for supercritical geothermal reservoir characterisation and exploitation). These approaches were: (1) development of several downhole instruments allowing them to function up to 300 ◦C and 400 ◦C, (2) identification of two new Na/Li cation ratio geothermometric relationships valid at very high temperature, (3) tracer testing with high temperature tolerant organic isomers and finally and (4) basalt rock deformation and petrophysical properties laboratory investigations at high temperature and pressure conditions.
ISSN: 0375-6505

hal-00921127
https://hal-brgm.archives-ouvertes.fr/hal-00921127
DOI : 10.1016/j.geothermics.2013.07.008

Éditeur(s) : HAL CCSD
Résumé : Geothermal energy is considered as a green and infinite energy source at human scale. Currently, the yield of geothermal power plants is limited to temperatures of the operating fluid which 350 °C. From tectonic and volcanic activity at mid-ocean ridges, Iceland is a location where supercritical fluid extraction (T> 375 °C) can considered for the near future. Exploiting such fluids could theoretically multiply by a factor of ten the electrical power delivered by geothermal wells. Can such fluids circulate at the base of brittle oceanic crust? This work investigates the petrophysical properties of basalts in order to constrain geophysical observations in Iceland and predict the behavior of very high temperature geo-hydrothermal reservoirs. The first approach consisted in studying the physical properties of rocks that have hosted deep hydrothermal circulations at oceanic ridges. The study of these rocks at ODP Site 1256 shows that the porosity measured both in the field and in the lab is associated with amphibolite facies alteration minerals (T> 500 ° C). The second approach was to recreate in the laboratory the conditions of pressure, temperature and pore fluid pressure of high temperature to supercritical hydrothermal systems to predict the mechanical and electrical properties of basalts under these conditions. The mechanical results indicate that the brittle/ductile transition occurs at a temperature of about 550° C, where a strong permeability decrease is expected. The implementation and calibration of a new cell for measuring electrical conductivity at high temperature provide the first results for the interpretation of geophysical data. When applied to basaltic crustal conditions in Iceland, these results indicate that hydrothermal fluids could circulate, at least temporarily, in a supercritical state up to 5 km depth.
La géothermie est considérée comme une source d'énergie propre et inépuisable à échelle humaine. Actuellement, le rendement des centrales géothermiques est limité à l'exploitation de fluides de températures inférieures à 350 °C. L'association de l'activité tectonique et volcanique aux dorsales océaniques fait de l'Islande un lieu où l'extraction de fluides supercritiques (T> 375 °C) peut être envisagée. Cette exploitation pourrait multiplier par dix la puissance électrique délivrée par le système géothermal. Ces fluides peuvent-ils circuler dans la croûte océanique ? Ce travail propose de contraindre les observations géophysiques et de prédire le fonctionnement des réservoirs géo-hydrothermaux de très haute température par l'étude des propriétés physiques des basaltes. La première approche est focalisée sur l'étude de roches ayant accueilli une circulation hydrothermale par le passé. L'étude de ces roches au site ODP 1256, montre que leur porosité est associée à la présence de minéraux d'altération hydrothermale du facies amphibolite (T> 500 °C). La seconde approche a consisté à recréer, en laboratoire, les conditions des systèmes hydrothermaux, à très haute température, afin de prédire les propriétés mécaniques et électriques des basaltes dans ces conditions. Les résultats mécaniques indiquent que la transition fragile/ductile, souvent associée à une forte décroissance de perméabilité, intervient à une température d'environ 550 °C. La mise en place d'une cellule de mesure de la conductivité électrique de haute température a fourni les premiers résultats utiles à l'analyse des données géophysiques. Appliqués aux conditions de la croûte basaltique Islandaise, ces résultats indiquent que des fluides hydrothermaux pourraient circuler au moins transitoirement à l'état supercritique jusqu'à ~ 5 km de profondeur.
https://tel.archives-ouvertes.fr/tel-00591798

tel-00591798
https://tel.archives-ouvertes.fr/tel-00591798
https://tel.archives-ouvertes.fr/tel-00591798/document
https://tel.archives-ouvertes.fr/tel-00591798/file/THESE_MV_pro.pdf

Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of this study is to identify links between the geothermal context and the conceptions in different initial teachers training, from the Caribbean and North America. The Caribbean Islands are located in a subduction zone, creating a great potential for geothermal energy. In Guadeloupe, this potential has been harnessed and a geothermal power plant produces about 5% of the local demand for electricity. It is called high temperature geothermy. In Quebec the bedrock mainly consists of ancient Precambrian rocks from the Canadian Shield, which does not allow for electricity production. The geothermal heat is used to regulate the temperature in buildings, to create spars, to grow crops and other purposes. It is called low temperature geothermy. This design-based research (Sandoval, W. et Al., 2004) takes part in the contextualization of sciences education research works (Blanchet, P. et Al., 2009, Anciaux, F. et Al., 2013) and in the continuation of the Gounouy project (Fecil, S. et Al., 2014). A project-based learning on geothermal energy has been set up with two groups of initial teachers training from the Université du Québec à Montréal (UQAM) and from the French West Indies University (UA). The purpose is to create collaborations between each group in order to enable them to encounter, recognize and formulate their conceptions. Further, they will collectively elaborate a more complex understanding of conceptions about geothermy. More specifically, the design used in this experiment aims to highlight context effects (Merlo-Leurette, S., Forissier, T., 2009). Context effects are pedagogical events occurring when there is a clash between the different conceptions of students, observed uring courses regarding different problematics related to geothermal energy. Communications via videoconferences were arranged so that the counterpart teams may discuss their investigative findings. Videos from the exchanges have been collected, as well as weekly summaries about student’s accomplishment, ideas, questions and feelings. Pre-test and post-test questionnaires on geothermal energy were submitted at the beginning and at the end of the project, to compare conceptions before and after the learning process. Collected data enables to bring out the student’s contextuality. Therefore, they highlight context effects, due to the differences between the geothermal contexts in Guadeloupe and in Montreal.This study is supported by the Geotref project.
CARIBBEAN ACADEMY OF SCIENCES 20 th GENERAL ASSEMBLY AND BIENNAL MEETING
Dehaies, Guadeloupe, France

hal-01534665
https://hal.univ-antilles.fr/hal-01534665

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
Despite many studies, our understanding of silica precipitation from natural waters remains limited, in particular for geothermal waters. Here we present a detailed study on the kinetics of silica polymerization as a function of fluid temperature and pH using high-temperature (250-260 °C) seawater-derived geothermal fluids as those discharged from the Bouillante geothermal site.We monitored the on-site decrease in monomeric silica concentration(initial SiO2 concentration of about 600 mg/l)with time using the molybdenum blue spectrophotometric method on samples of separated water collected from the high-pressure separator at 167 °C and cooled to 25, 50, 75, and 90 °C and for pH values ranging from 5 to 8. During all these experiments, only silica polymerization was observed, with the formation of colloidal particles in suspension in the solutions. No scaling of amorphous silica was formed. The collected data were after modeled in order to determine the useful kinetic parameters for predicting and preventing amorphous silica precipitation in the production wells during fluid exploitation in the specific context of Bouillante. Results under the investigated experimental conditions show that the kinetics of silica precipitation is affected more strongly by pH than by temperature change. The reaction in the acidic Bouillante solution begins with a transition period that significantly decreases the kinetics of silica polymerization. Modeling the experimental data indicates that the silica polymerization up to the state of equilibrium is characterized by a 2nd-order kinetic law relative to dissolved silica; this could indicate that the polymerization is controlled mainly by the formation of dimers. However, the first hour of the experiments is better characterized by a 4th-order kinetic law, suggesting more complex polymerization reactions in the initial stage with the formation of nanocolloidal particles containing 3 to 4 monomers. In both cases, the corresponding kinetics rate constant k is linearly dependent on pH for pH between 5 and 7. The activation energy Ea for the overall reaction, calculated using the Arrhenius equation under the considered pH and temperature conditions, ranges between 41±9.8 and 54±9.6 kJ/mol. To complete this work, the colloid particles formed at the end of the kinetics experiments were extracted and analyzed by SEM and TEM microscopy, X-ray Diffraction and the BET method. Results show that the size of the colloids increase and their specific surface decrease with increasing pH and are thus dependent on pH. Globally, our work provides a reliable database for understanding silica polymerization kinetics in natural geothermal brines or geologic waters characterized by a near neutral pH and moderate dissolved silica concentrations.
ISSN: 0009-2541

hal-01403092
https://hal-brgm.archives-ouvertes.fr/hal-01403092
DOI : 10.1016/j.chemgeo.2016.08.031

Éditeur(s) : HAL CCSD
Résumé : International audience
Si la production d'énergie renouvelable solaire, éolienne et géothermique est bien développée en Guadeloupe, il n'en est pas de même de l'éducation au développement durable dont la mise en place est très récente. Issu de travaux portant sur les mécanismes de contextualisation des savoirs scientifiques, l'enquête exposée ici vise à caractériser les conceptions d'élèves de CM2 sur la géothermie en fonction du contexte géologique dans lequel ils vivent. L'impact de l'opinion de l'enseignant sur celles de ses élèves est également mis en question par le fait que les élèves ayant un enseignant impliqué de manière critique ou positive ont une opinion plus positive de l'usine géothermique voisine. La détermination de l'opinion des élèves sur cet exemple semble donc soit être plus influencée par le contexte familial que par le scolaire, soit ne se construire plus nettement, par accord ou par opposition, face à l'implication de l'enseignant. Abstract If the production of solar, wind and geothermal energy is important in Guadeloupe, it is not the same for sustainable development education. Deriving from work on the mechanisms of contextualization of scientific knowledge, the investigation presented here aims to characterize the concepts of 10 years pupils about geothermal energy as a function of geological setting in which they live. The impact of the views of the teachers on those students is also questioned. Pupils with one teacher involved in citizen group critical or positive about geothermal plant, have a more positive view of the nearby geothermal plant. The determination of students' opinions on this example seems to be more influenced by family background than by the school or not to build more significantly, by agreement or opposition, given the involvement of the teacher.
19th Caribbean Geological conference
Gosier, Guadeloupe

hal-01539490
https://hal.univ-antilles.fr/hal-01539490
https://hal.univ-antilles.fr/hal-01539490/document
https://hal.univ-antilles.fr/hal-01539490/file/FORMACOR.pdf

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
We present new groundmass K–Ar ages obtained using the Cassignol–Gillot technique, together with whole-rock major and trace elements, from Les Saintes islands (Terre-de-Haut and Terre-de-Bas). They are located along the northern Lesser Antilles inner arc, between Basse-Terre Island (western Guadeloupe) to the North and Dominica Island to the South. Ages reveal that the main volcanic phase in Terre-de-Haut occurred between 2.98 ± 0.04 and 2.00 ± 0.03 Ma, and show that the onset of sub-aerial volcanism in Terre-de-Haut is slightly older (~ 0.2 Myr) than that of northern Basse-Terre. Volcanism in Les Saintes resumed to the west, with the rapid construction of Terre-de-Bas Island at 0.888 ± 0.009 Ma. Major elements analyses show that most lavas from Les Saintes belong to a sub-alkaline medium-K magmatic series and are mainly andesites, with relatively rare basaltic andesites and dacites. Rare earth elements spectra reveal a strong enrichment in light elements, as observed for Dominica lavas, and significantly higher than observed for Basse-Terre lavas. Noticeably, Terre-de-Bas spectra display more enriched patterns relative to those from Terre-de-Haut lavas, suggesting a lower degree of partial melting or a stronger sedimentary component incorporated to the subducting slab. Overall, geochemical signatures of Les Saintes and Dominica magmas display common characteristics, which we interpret as reflecting strong petrogenetic affinities, while both are significantly different from that of Basse-Terre lavas. Finally, this study provides a precise timing of subaerial volcanism of Les Saintes Islands, which can be used to better constrain through time the development of the tectonic half-graben where these islands lie, which is part of the arc-parallel en-echelon faults system accommodating the oblique convergence of the North American plate from Montserrat to Dominica. In addition, these results reveal that the initiation of Terre-de-Haut volcanism is presently the oldest dated volcanism from the northern part of the Lesser Antilles active arc.
ISSN: 0377-0273

hal-01067336
https://hal.archives-ouvertes.fr/hal-01067336

Résumé : Le fluide chaud produit par les forages de la centrale géothermique de Bouillante (Guadeloupe) est enrichi en espèces dissoutes telles que la silice qui peuvent précipiter sous forme de dépôts solides lors de son refroidissement et gêner fortement la production électrique. L’un des principaux objectifs de ce travail de thèse a donc été d’améliorer l’état des connaissances sur les conditions physiques, chimiques et cinétiques de la précipitation de la silice amorphe à Bouillante. Après une étude des caractéristiques physico-chimiques des fluides et des dépôts associés au champ de Bouillante, des expériences sur la cinétique de précipitation de la silice, sur site, pour une large gamme de température (25 - 90°C) et de pH (4 - 12) ont été menées et analysées en détail.Pour l’ensemble de ces expériences, seule la polymérisation (réversible) de la silice dissoute, sous forme de suspensions colloïdales très stables en solution, a été observée. La modélisation des données expérimentales de cinétique montre que la vitesse de polymérisation de la silice suit une loi d’ordre 2 vis-à-vis de la silice dissoute jusqu’à l’équilibre en accord avec une dimérisation de la silice. Par contre, durant l’étape initiale de la réaction, une loi d’ordre 4 semble mieux adaptée, suggérant des réactions de polymérisation plus complexes avec formation de tétramères. La température a un effet limité sur la cinétique de polymérisation de la silice comparé à l’effet du pH qui est beaucoup plus important. L’énergie d’activation de la réaction globale est de 41 - 54 kJ pour des pH compris entre 5 et 8.La caractérisation de la silice précipitée a mis en évidence des différences notables entre la structure poreuse de la silice solide prélevée sur les installations de surface et celle de la silice colloïdale obtenue par polymérisation lors des expériences de cinétique, ce qui semble indiquer que des mécanismes différents interviennent dans ces deux contextes de précipitation de la silice dissoute.Le deuxième objectif de cette thèse était d’évaluer la possibilité de valoriser la silice extraite de l’eau géothermale de Bouillante dans un procédé de traitement des eaux naturelles par adsorption. Pour cela, les propriétés d’adsorption de la silice géothermale brute et fonctionnalisée par le poly(ethylèneimine) (ou PEI) ont été étudiées pour deux polluants : un colorant, le bleu de méthylène et un métal lourd, le plomb. Les résultats obtenus montrent que la silice brute possède une grande capacité d’adsorption vis-à-vis du bleu de méthylène. En outre, la fonctionnalisation de la silice par le PEI permet d’améliorer sa capacité d’adsorption vis-à-vis du plomb en solution, en accord avec un modèle cinétique du pseudo-second ordre suggérant une chimisorption. Le modèle d’isotherme de Redlich-Peterson est également en très bon accord avec les données expérimentales.
The hot geothermal fluid produced by the geothermal power plant of Bouillante (Guadeloupe) contains various dissolved components such as silica that can precipitate as solid deposits during their cooling and cause serious problems on the electricity generation. One of the aim of this study is to improve the understanding on the physical, chemical and kinetics conditions of the amorphous silica precipitation in the Bouillante geothermal field. After a study on the physical and chemical characteristics of the Bouillante fluids and deposits which can form during their exploitation, experiments on the kinetics of silica precipitation, on site, under a large range of temperature (25 – 90°C) and pH (4 – 12) have been carried out and analyzed in detail.During on site kinetics experimentations only dissolved silica polymerization (reversible) as colloidal gel, very stable in solution, was observed. Modeling of the experimental data showed that the kinetics polymerization is characterized by a 2-order kinetic law relative to dissolved silica until the equilibrium that is consistent with silica dimerization. On the other side, the initial stage of the reaction is better characterized by a 4-order kinetic law that suggested more complex polymerization reactions with tetramers formation.Temperature has a little effect on the polymerization kinetics compared with the pH which has an effect more important. The activation energy of silica precipitation calculated between 25 and 90°C, is about 41 - 54 kJ for pH ranging to 5 - 8.The characterization of the silica precipitate reveals significant differences in the porous structure of the silica collected on the surface installations and the one obtained from kinetic experiments that suggests different precipitation mechanisms. The second objective of this thesis was to evaluate the possibility to promote geothermal silica for the treatment of natural waters containing contaminants by adsorption. Adsorption properties of the untreated and functionalized by poly(ethylèneimine) (ou PEI) geothermal silica have been investigated for two pollutants: a colorant, the methylene blue and a heavy metal, the lead.Results showed that untreated silica has a great adsorption capacity concerning the methylene blue. Besides, silica functionalization by the PEI allows improving the adsorption capacity for lead in solution. The adsorption kinetics curves followed a pseudo-second order model consistent with a chimisorption. The isotherm model of Redlich-Peterson fitted well the experimental data.

http://www.theses.fr/2014AGUY0698/document

Éditeur(s) : HAL CCSD
Résumé : International audience
The purpose of our study is to model a geothermal reservoir. When geothermal reservoir are assumed to be composed of pure water, the transfer of mass and energy is classically described by two balance equations: mass balance equation and the energy balance equation. In addition to those equations, fluid velocity ist classically given by the Darcy law while thermodynamic properties, inferred from theoretical or empirical equations of state, are used to close the mathematical system. Once this system is closed, there exist different solutions. The first one is to solve for pressure and temperature with a variable switch to saturation in the two-phase region (e.g. TOUGH2). The second one is to solve for pressure and enthalpy to increase stability of phase transition between single and two-phase states (e.g. Hydrotherm). We adopted the second option and chose te use a splitting method to get rid of the complexity of coupling equations and a finite volume method for the spatial discretization. Selecting object-oriented languages, we developed a multi-language framework, combining Python, Fortran and a C++ implementation of IAPWS (from the freesteam project) including the supercritical equations, in porous media velocity is given by Darcy law and to close the system physical properties are determined by the IAPWS-IF97 thermodynamic formulation. We resolve the equations in pressure and enthalpy instead of pressure and temperature in order to increase stability and to handle easier the passage from a single-phase to a two-phase system. We solve the system by using a splitting method - to get rid of the complexity of coupling equations - and a finite volume method. We offer some freedom to users thanks to the implementation of several methods like explicit or implicit Euler, Runge-Kutta or BDF2 for time solvers or GMRES and BICGSTAB for the linear solver. We can handle several boundary conditions like no-flow - describing a boundary which can not exchange matter with the exterior - or like a mixed-therm condition - a Dirichlet condition to the pressure and a Dirichlet or an outflow condition to the temperature in order to describe a recharge or a discharge zone - ... We're developing a multi-language framework, combining Python, Fortran and the C++ implementation of IAPWS (from the freesteam project). All these languages are object-oriented. We've applied this simulation model to the dogger in Paris, France, to several one-dimensional systems and a two-dimensional one made by Coumou with the CSMP++ platform. The dogger is a reservoir exploited to produce heat by pumping water at 70 and reinjecting it in the reservoir at 40. In the one-dimensional systems we wanted to observe the process of heat transfer from a higher temperature boundary to a smaller one in a high-energy domain. The last simulation shows the natural convection of water in a fault. For every simulation we compared the solutions we found with an other code (TOUGH2 or CSMP++) and they agreed. The next step will be to model the geothermal plant in Guadeloupe, West Indies. It's the only place in France - and in the West Indies so far - producing electricity with the earth power. The temperature can reach up to 1000 and the pressure range is around a few hundreds MPa. In some surface zones we can see two-phase water at atmospheric pressure. In the 1980s Bouillante was a laboratory for France. Since 1995 Bouillante has given 30GWh electricity a year to the Guadeloupeans.
PROCEEDINGS, Thirty-Ninth Workshop on Geothermal Reservoir Engineering
Stanford, United States

Droits : info:eu-repo/semantics/OpenAccess
hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133
https://hal-brgm.archives-ouvertes.fr/hal-00944133/document
https://hal-brgm.archives-ouvertes.fr/hal-00944133/file/Copol.pdf

Éditeur(s) : HAL CCSD
Résumé : EGU2012-6377- Geophysical Research Abstracts vol. 14
The hot geothermal fluid produced by the wells of the Bouillante power station, in Guadeloupe, contains various dissolved species such as silica or some metals (Zn, Pb, etc). During the exploitation, the geothermal fluid is flashing and cooling (from 260 to 160°C for the high-pressure steam-liquid separation and down to 110°C for the low-pressure phase separation of a part of the separated liquid at 160°C). Consequently, the dissolved species can form scale deposits such as amorphous silica or poly-metallic sulphides, according to the exploitation conditions, and cause serious scaling problems on the production and the surface installations. These minerals could also precipitate during the partial underground re-injection of the production fluids which is being set up in the Bouillante power station. In this study, in order to predict and prevent the possible silica precipitation at temperature lower than 160°C, during the partial underground reinjection of the production fluids of Bouillante or their thermal valorization down to 110°C temperatures, we propose to investigate on site the kinetics of silica precipitation as a function of temperature and pH. The experiments presented here were carried out on site on samples of separated waters collected after the steam-water separator at 160°C, containing about 600 ppm of SiO2, at four cooling temperatures: 22, 50, 75 and 90°C, and for pH ranging from 4 to 9. These experiments showed that the silica deposition was always initiated by a polymerization mechanism characterized by an order 2 kinetic law and the formation of a white colloidal gel, which slowed down the silica precipitation under solid form. This latter was observed much later, after the polymerization stage, and only in particular conditions (long time of atmospheric exposure, water stagnation,. . . ). The results also confirmed that the silica precipitation kinetics is strongly dependent on pH. In acidic solution, a transition period is observed before the beginning to the silica polymerization. At neutral-basic pH, there is no transition period and the rate of polymerization is maximal for pH close to 8. The undergoing modeling of these experimental data and specific surface area measurements on the colloidal gel will allow us to determinate the kinetics parameters useful for the prediction and prevention of silica precipitation under the specific exploitation conditions of Bouillante power station. This work is financially supported by ADEME (French Agency for Energy and Environment), BRGM and UAG.
EGU General Assembly 2012
Vienne, Austria

hal-00697627
https://hal-brgm.archives-ouvertes.fr/hal-00697627

Éditeur(s) : HAL CCSD
Résumé : Proceedings of the 10th International and Interdisciplinary Conference, CONTEXT 2017, Paris, France, June 20-23, 2017
International audience
This paper presents a research project in science education that is positioned at the intersection of computer science and context in learning. The main objective is to improve learning process by creating a software tool that participates, from the inception to the achievement, in the design of leaning scenarios, based on context effects, and, to show that context effects' learning is an efficient method in the development of student's knowledge regarding a concept. The software will compute differences between two – or more – external contexts based on specific parameters, related to the phenomenon or object that students are expected to study. The elaboration of the calculator (" the MazCalc ") is conducted using the design based research theory, meaning that several iterations of learning field experiments are conducted in order to collect relevant data which are used for the tool creation. In this paper, the design of the scenario involves students from North America and from the French West Indies and the concept studied is about geothermal energy. The instantiation of the context calculator is made with the geothermal object of study, and the differences are computed in the calculator between the two contexts mentioned. This example makes possible to validate the link between context effects predicted and observed, and also to study the impact of external context on the learning process. This study has been conducted thanks to the GEOTREF project support.
Modeling and Using Context

ISBN : 978-3-319-57837-8
hal-01625781
https://hal.univ-antilles.fr/hal-01625781
https://hal.univ-antilles.fr/hal-01625781/document
https://hal.univ-antilles.fr/hal-01625781/file/Elaborating%20the%20context%20calculator%20CONTEXT2017.pdf

Éditeur(s) : HAL CCSD Wiley
Résumé : International audience
The deeply branching Deinococcus-Thermus lineage is recognized as one of the most extremophilic phylum of bacteria. In previous studies, the presence of Deinococcus-related bacteria in the hot arid Tunisian desert of Tataouine was demonstrated through combined molecular and culture-based approaches. Similarly , Thermus-related bacteria have been detected in Tunisian geothermal springs. The present work was conducted to explore the molecular diversity within the Deinococcus-Thermus phylum in these extreme environments. A set of specific primers was designed in silico on the basis of 16S rRNA gene sequences, validated for the specific detection of reference strains, and used for the polymerase chain reaction (PCR) amplification of metagenomic DNA retrieved from the Tataouine desert sand and Tunisian hot spring water samples. These analyses have revealed the presence of previously undescribed Deino-coccus-Thermus bacterial sequences within these extreme environments. The primers designed in this study thus represent a powerful tool for the rapid detection of Deinococcus-Thermus in environmental samples and could also be applicable to clarify the biogeography of the Deinococcus-Thermus phylum.
ISSN: 2045-8827

Droits : http://creativecommons.org/licenses/by/
hal-01560945
https://hal-amu.archives-ouvertes.fr/hal-01560945
https://hal-amu.archives-ouvertes.fr/hal-01560945/document
https://hal-amu.archives-ouvertes.fr/hal-01560945/file/Theodorakopoulos-2013.pdf
DOI : 10.1002/mbo3.119

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
During the last decade, the interaction of deep processes in the lithosphere and mantle with surface processes (erosion, climate, sea-level, subsidence, glacio-isostatic readjustment) has been the subject of heated discussion. The use of a multidisciplinary approach linking geology, geophysics, geodesy, modelling, and geotechnology has led to the awareness of coupled deep and surface processes. Deep earth dynamics (topography, erosion, tectonics) are strongly connected to natural hazards such as earthquakes, landslides, and tsunamis; sedimentary mass transfers have important consequences on isostatic movements and on georesources, geothermal energy repartitions. The ability to read and understand the link between deep Earth dynamics and surface processes has therefore important societal impacts. Ground-truthing at carefully-selected sites of investigation is imperative to better understand these connections.Due to its youth (<30 Ma) and its subsidence history, the almost land-locked Gulf of Lion–Sardinia continental margins system provides a unique record of sedimentary deposition from the Miocene to present. Due to its high subsidence rate, palaeoclimatic variations, tectonic events and vertical evolution are all recorded here at very high resolution. The late Miocene isolation and desiccation of the Mediterranean, the youngest and most catastrophic event, the Messinian Salinity Crisis (MSC), induced drastic changes in marine environments: widespread deposition of evaporite (gypsum, anhydrite and halite) in the central basin, and intense subaerial erosion along its periphery. These extraordinary mass transfers from land to sea induced strong isostatic re-adjustments that are archived in the sedimentary record and represent a window to the lithospheric rheology and the deep processes.The GOLD (Gulf of Lion Drilling) project, proposes to explore this unique sedimentary record as well as the nature of the deep crustal structure, providing valuable information about the mechanisms underlying vertical motions in basins and their margins.
ISSN: 0264-8172

insu-01197393
https://hal-insu.archives-ouvertes.fr/insu-01197393
https://hal-insu.archives-ouvertes.fr/insu-01197393/document
https://hal-insu.archives-ouvertes.fr/insu-01197393/file/Rabineau%20et%20al.-final-MPG2014_REVISED-FINAL-No-Marked_FINAL%2BFigures.pdf
DOI : 10.1016/j.marpetgeo.2015.03.018

Éditeur(s) : HAL CCSD
Résumé : 1 page
The main aim of this study, co-funded by BRGM, Regional Council of Guadeloupe, European Union, ADEME and UAG, was to examine the silica deposition mechanisms and estimate their deposition kinetics at acidic and basic pH conditions, during the cooling from 260 to 25°C of separated waters, discharged from production wells, located in the Bouillante geothermal field. The acquisition of this type of information is very useful not only for the geothermal exploitation but especially, if production fluids are re-injected in the ground, as this is envisaged in the Bouillante geothermal field. The different on site experiments showed that, in these conditions, the silica deposition was always initiated by a silica polymerization mechanism and the formation of a white colloidal gel, which slowed down the silica precipitation. In agreement with the literature data, this polymerization mechanism is characterized by an order 2 kinetic law, strongly dependant on pH. The determination of the specific surface area by specific mercury porosimetry for this gel (250 m2/g) in the UAG laboratories, allowed estimating the corresponding kinetic constant at 25°C. Other experiments at different final temperatures (50, 75 and 100°C) are necessary in order to define this constant as a function of the temperature. The silica precipitation under amorphous silica form was observed much later, after the polymerization stage, and only in particular conditions (long time of atmospheric exposure, water stagnation...). The pH of the Bouillante geothermal fluid is estimated to be close to 5.3±0.3, at 260°C, in the reservoir conditions. If this parameter, very influent on the kinetics of silica deposition, can be preserved at values less than 7 during the re-injection of the production fluids in the ground at relatively high temperatures (150-160°C), it is strongly probable that no chemical treatment is necessary to avoid silica precipitation.
19ème Conférence Géologique de la Caraïbe - 2011
Gosier, Guadeloupe, France

hal-00575943
https://hal-brgm.archives-ouvertes.fr/hal-00575943